Tools

This is not an original Boley Spindle. It does fit the Boley lathe and accepts both the Boley lathe chucks as well as the WW pattern lathe chuck...

Very supple, absolutely noiseless and without junction. This belt may be cust at the required length and joined in a few seconds. Supplied by the...

Very supple, absolutely noiseless and without junction. This belt may be cust at the required length and joined in a few seconds. Supplied by the...

Very supple, absolutely noiseless and without junction. This belt may be cust at the required length and joined in a few seconds. Supplied by the...

Very supple, absolutely noiseless and without junction. This belt may be cust at the required length and joined in a few seconds. Supplied by the...

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.10 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.30 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.70 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.90 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 4.10 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 4.30 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 4.40 mm.

Lathe Chuck Grinding Wheel Holder to accommodate wheels with a hole fitting of 10.00 mm. This fits into the lathe at 6.80 mm, shank diameter is...

Lathe Chuck Milling Cutter Holder to accommodate wheels with a hole fitting of 5.00 mm. This fits into the lathe at 6.80 mm, shank diameter is ...

Shilling Chuck for Pocket Watch Balances, fits a number 50 wire chuck

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 0.10 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.00 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.10 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.20 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.30 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.40 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.50 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.60 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.70 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.80 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.90 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 0.20 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 2.00 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 2.10 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 2.20 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 2.30 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 2.40 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 2.50 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 2.70 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 2.80 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 2.90 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 0.30 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.00 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.10 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.30 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.60 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.70 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.80 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.90 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 0.40 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 4.00 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 4.10 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 4.20 mm.