Tools

Wide Finger Gauge is a set of 6 mm wide, flat finger gauges. This set covers size from 1 through to 15 in 1/2 sizes (increments).

Wide Slotted Bracelet Block is designed to hold watch bracelets upright to make bracelet pin removal easier. This wide slotted bracelet block is ma...

Wing Nut Hand Vises Serrated, grooved, spring action jaws open and close with large wing nut. Handles are hollow so that long wire will pass throu...

Wire Bending Jig bends and forms wire and metal strips. Use in a vice or attach to the bench.

Wire Bending Tool 7 3/4" Approximately 7 3/4" in length, with a 1/4" deep slot at each end. Helpful when putting a clock into beat. This Wire Bendi...

Wire Bending Tool 5 1/4" is approximately 5 1/4" long with 1/4" deep slot. Helpful when putting a clock into beat. 5 1/4" Wire Bending Tool comes i...

Wolf Touch-Up Wax Ideal for final touch-up of wax imperfections. Can be easily scraped off for a smooth finish. Flows at 163°F.

Wood Arbor - 7" Coat with adhesive and roll in abrasive to form a polishing stick. Has 1/4" arbor hole for tapered spindle mounting. Made of birc...

Wood Bench Pins Fits into slot in your work bench. Use as support when filing, sawing, setting, etc.

Wood Box Bur Holder Wood box holds 36 burs with hinged lid and clasped closure.

Wood Case for Test Acids is a wood case with a hinged lid and magnetic catch for storing test acids and accessories. This case is divided into 5 co...

Wood File Handles With natural finish. Wound wire ferrule provides extra strength to prevent splitting. Select handle to fit files 2" to 14" (50-3...

Wood Handle Washout Brush Four rows of stiff bristles. Overall length is 8-1/4". Dimensions provided describe overall length and width of rows of...

Wood Handle Washout Brush for multi-purpose cleaning and dusting brush has 4 rows of medium-hard bristles 4" in length. Overall length 8 ¾ ".

Wood Handled Pin Pusher Wood Handle Pin Pusher is used to remove spring bars from watch cases or strap buckles. This pusher has a hardwood handle w...

Wood Hub Wheel Brush, 1 Row, Upright, Overall diameter 3 1/8" Wood Hub Wheel Brush Style 1A, 1 Row, Upright, Overall diameter 3 1/8" consists of Ch...

Wood Hub Wheel Brush, 1 Row, Upright, Overall diameter 3" Wood Hub Wheel Brush, 1 Row, Upright, Overall diameter 3" consists of Chungking bristles ...

Wood Hub Wheel Brush, 4 Rows, Converging,  Overall diameter 2 5/8" Wood Hub Wheel Brush Style 2C, 2 Rows, Converging, Overall diameter 2 5/8" consi...

Wood Hub Wheel Brush, 4 Rows, Converging,  Overall diameter 3 1/8" Wood Hub Wheel Brush Style 2A, 2 Rows, Converging, Overall diameter 3 1/8" consi...

Wood Hub Wheel Brush, 2 Rows, Converging, Overall diameter 1 7/8" Wood Hub Wheel Brush, 2 Rows, Converging, Overall diameter 1 7/8" consists of Chu...

Wood Hub Wheel Brush, 2 Rows, Converging, Tapered Hole, Overall diameter 2 1/2" Wood Hub Wheel Brush Style 6A, 2 Rows, Converging, Overall diameter...

Wood Hub Wheel Brush, 2 Rows, Converging, Tapered Hole, Overall diameter 2"Wood Hub Wheel Brush Style 6C, 2 Rows, Converging, Overall diameter 2" c...

Wood Hub Wheel Brush, 3 Rows, Upright,  Overall diameter 2 3/4" Wood Hub Wheel Brush, 3 Row, Upright, Overall diameter 2 3/4" consists of Chungking...

Wood Hub Wheel Brush, 4 Rows, Converging,  Overall diameter 3 1/2" Wood Hub Wheel Brush, 4 Rows, Converging, Overall diameter 3 1/2" consists of Ch...

Wood Hub Wheel Brush, 3 Rows, Converging,  Overall diameter 3"Wood Hub Wheel Brush, 4 Rows, Upright, Overall diameter 3" consists of Chungking bris...

Wood Mandrel for Inside Ring Shells Use with Sangers emery shells. Drilled to fit on a tapered spindle. Also handy as a holder for polishing ring...

Wood Ring Clamp Quality wood clamp with leather-lined jaws for holding rings and other pieces. One side is rounded, the other is squared off. Wedg...

Wood-Handled Hand Vise A lightweight vise mounted in a wood handle. Jaws are smooth and open to 1" (25mm). Overall length is 6-1/4" (159mm). Jaw w...

Wooden Block for Reamer Handle and Reamers This Wooden Block has one large hole, and 11 small holes to accept both American Made and German Made KW...

Wooden Bur Block Handy Block Varnished wooden block for storing burs. The sloped upper surface staggers the rows of burs like seating in a theater....

Wooden Bur Box Makes finding the right size bur easy. This box slips into your center bench drawer. Made of hardwood with removable dividers. Dim...

Wooden Pliers Rack This rack features a 7-1/2" bar area for easy accessibility to your favourite pliers. Two "tray extensions," each with two rou...

Wooden Pliers Rack with Drawer Has slots for seven pliers, shelf for miscellaneous small tools and a handy storage drawer. Varnished natural fini...

Wooden Ring Stick Hardwood and easy-to-read sizes. Sizes 3 to 15 in half sizes by US standards.

Wooden Tweezer to Hold Rings can be used to hold rings when cleaning with a steam cleaner. This tweezer has 6 grooves, should you require to clean ...

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 0.10 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.00 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.10 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.20 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.30 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.40 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.50 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.60 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.70 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.80 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.90 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 0.20 mm.